User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
17
After selecting OK, the new site will now appear in the project window as shown below.
When a Project file is open (ie. it is the active window), RTU sites can be added or removed from the project
by using the menu Project, Add A Site Or Logic File or Project, Remove Site.
By double-clicking on “Site 001: …” etc in the project window, the Pump Station.SDB file will appear. The
RTU settings can then be configured using the Configuration menu.
An RTU is configured by stepping through each of the Configuration options and filling in the appropriate
information as detailed in the following sections.