User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
167
Digital Input (eg. DI-10 Channel 1) Register Bit Read * (eg. #R1.1)
Slot Ch Address Reg. Bit Address
1 1-16 10,001 - 10,016 1 1-16 12,001 - 12,016
2 1-16 10,017 - 10,032 2 1-16 12,017 - 12,032
3 1-16 10,033 - 10,048 3 1-16 12,033 - 12,048
4 1-16 10,049 - 10,064 4 1-16 12,049 - 12,064
5 1-16 10,065 - 10,080 5 1-16 12,065 - 12,080
6 1-16 10,081 - 10,096 6 1-16 12,081 - 12,096
7 1-16 10,097 - 10,112 7 1-16 12,097 - 12,112
8 1-16 10,113 - 10,128 8 1-16 12,113 - 12,128
9 1-16 10,129 - 10,144 9 1-16 12,129 - 12,144
10 1-16 10,145 - 10,160 10 1-16 12,145 - 12,160
11 1-16 10,161 - 10,176 11 1-16 12,161 - 12,176
12 1-16 10,177 - 10,192 12 1-16 12,177 - 12,192
13 1-16 10,193 - 10,208 13 1-16 12,193 - 12,208
14 1-16 10,209 - 10,224 14 1-16 12,209 - 12,224
15 1-16 10,225 - 10,240 15 1-16 12,225 - 12,240
16 1-16 10,241 - 10,256 16 1-16 12,241 - 12,256
..
10,000 + [(Slot-1)x16] + Ch
..
12,000 + [(Reg. -1)x16] + Bit
64 1-16 11,009 - 11,024 500
1-15
19,985 - 19,999
Digital Output (eg. DO-2 Channel 1)
Note: IO-2/3/4 digital outputs start at Ch 9
Register Bit Read/Write * (eg. #R1.1)
Slot Ch Address Reg. Ch Address
1 1-16 00,001 - 00,016 1 1-16 02,001 - 02,016
2 1-16 00,017 - 00,032 2 1-16 02,017 - 02,032
3 1-16 00,033 - 00,048 3 1-16 02,033 - 02,048
4 1-16 00,049 - 00,064 4 1-16 02,049 - 02,064
5 1-16 00,065 - 00,080 5 1-16 02,065 - 02,080
6 1-16 00,081 - 00,096 6 1-16 02,081 - 02,096
7 1-16 00,097 - 00,112 7 1-16 02,097 - 02,112
8 1-16 00,113 - 00,128 8 1-16 02,113 - 02,128
9 1-16 00,129 - 00,144 9 1-16 02,129 - 02,144
10 1-16 00,145 - 00,160 10 1-16 02,145 - 02,160
11 1-16 00,161 - 00,176 11 1-16 02,161 - 02,176
12 1-16 00,177 - 00,192 12 1-16 02,177 - 02,192
13 1-16 00,193 - 00,208 13 1-16 02,193 - 02,208
14 1-16 00,209 - 00,224 14 1-16 02,209 - 02,224
15 1-16 00,225 - 00,240 15 1-16 02,225 - 02,240
16 1-16 00,241 - 00,256 16 1-16 02,241 - 02,256
..
(Slot -1)x16 + Ch
..
2,000+[(Reg.-1)x16]+Ch
64 1-16 01,009 - 01,024 500
1-15
09,985 - 09,999
* It is only possible to access up to Ch15 of Register 500 (corresponding to address 09,999 or 19,999) as a register bit.
Ch16 of R500 (and after) cannot be accessed as a digital input or output. However, it is possible to read and write to all
of the local registers using integer values.