User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
103
Get Image Buffer Statistics
Monitors the RTU's image memory buffer. PC-1/CP-1 requires driver IMAGExx.DRV to support an MC-xx
with an Image Capture option board.
Slot Address: (0-64) The slot address of the module with the image option board. Set to 0 for a CP-10/11 or
set to the slot address for an MC-10/11.
Total Images: (Optional local register) The total number of images that are stored in the RTU. Once the
RTU's image buffer is full, this number will not change.
Unread Images: (Optional local register) The total number of images that have never been read by Image
Manager or any other software.
Next Image Number: (Optional local register) Image number to be assigned to the next image captured.
Image Pointer: (Optional Local register or FFFF) A local register that points to a particular image in the
buffer. Used by Image Manager to keep track of the last image uploaded from the RTU.
Total Images After Pointer: (Optional local register) The total number of images in the buffer after the
image specified by Image Pointer above. When Image Pointer is set to FFFF (or to a value outside the range
of images in the RTU), Total Images After Pointer will return the total number of images in the RTU (the
same as Total Images above).
First Image After Pointer: (Optional local register) The first image after the image specified by Image
Pointer above. When Image Pointer is set to FFFF (or to a value outside the range of images in the RTU),
First Image After Pointer will return the image number of the oldest image in the RTU.