Instruction manual

Model DCP-NextG Digital Cell Phone Kit

In the Deployment tab, select the following settings:

Field

Value

CS I/O Mode

Modem Enable

CS I/O Baud Rate

115.2k

RS-232 Mode

PC/PDA

Baud Rate

115.2k

Table 5-3 SC105 Configuration Settings

Once this is done, click Apply. Connect to the SC105 again and select the Settings Editor Tab.

Change the RS-232 Auto Power Down setting to “RS-232 Always Active to power RS-232

devices” and click Apply again. Your SC105 is now configured for use with a DCP-

SAM3GPLUS-CSIO modem kit.

Figure 5-3 SC105 Deployment Configuration