Owner`s manual

CONTROLS AND FUNCTIONS

A. Microphone Jack

B. Off/ On-Volume Control

C. Squelch Control

D. RF Gain Control: Adjusts the receiving sensitivity of the

radio

E. SWR Calibration Control: Manually calibrates the SWR

meter

F. CB/WX Mode Selector: Selects CB or weather operation

G. CB/WX Channel Selector

H. LED Channel display: Indicates the CB channel selected

I. Weather (WX) LED Indicator: Identifies weather mode

J. Receive (RX)/Transmit (TX) LED Indicator: Identifies

radio status

K. Display Bright / Dim Switch

L. CB-PA Switch: Position selects normal CB operation or

Public Address mode

M. NB/ANL-ANL-OFF Switch: Position selects noise blanker

with automatic noise limiter circuitry; ANL circuitry only;

or off

N. CH 9-NOR-CH 19 Switch: Position selects Emergency

CH 9; normal CB channels (1-40); or Highway CH 19

O. S/RF-SWR-CAL Switch: Position selects function of analog

meter: measuring radio input/output signal power

strength; measuring Standing Wave Ratio of antenna; or

entering SWR calibration mode

P. Front-mounted, Deluxe Microphone

Q. Analog Meter: Measures and displays the Standing Wave

Ratio (SWR) of the CB antenna system; actual RF output

power when transmitting; and input signal strength when

receiving

Antenna Pigtail Jack: Located on back panel, not shown

PA Speaker Jack: Located on back panel, not shown

External Speaker Jack: Located on back panel, not shown

DC Power Cord Jack: Located on back panel, not shown