Owner`s manual

MOBILE ANTENNA INFORMATION

Your Maxon MCB-100 WXD requires a vehicle mount

CB/weather antenna for operation. An antenna is

not included with your MCB-100 WXD because of

varying vehicle applications, individual needs, and

owner cost preferences.

You may use any standard 50 Ohm vehicle mount

CB/weather antenna system with a PL-259 connector.

Maxon antenna model WTA-4WP may be obtained

from your local Maxon CB distributor/retailer.

NOTE: When installing a mobile antenna, please

follow the antenna manufacturer's installation

instructions completely. Never operate your CB

radio without an antenna or with a broken antenna

cable. This can result in internal damage to your CB

circuitry.

• Connect the antenna securely to the unit's

antenna receptacle

• Mount the antenna as high on the vehicle as

possible - the more the antenna extends above

the roof, the better the reception

• If possible, mount the antenna in the center of

the surface you have chosen

• Keep the antenna cables away from noise sources

such as the ignition system, gauges, etc.

• Make sure you have a solid, metal-to-metal

ground