Owner`s manual

ignition switch, such as a spare accessory terminal
in your vehicle's fuse box.
3. Connect the orange (Batt +)
wire to your vehicle's
battery positive (+)
terminal or to a point in
the vehicle's fuse box
that provides a continuous
source of 12 Volts even
when the ignition is turned off. This connection
provides last channel memory feature.
Positive Ground System Connection
1. Connect the black (Batt -) wire to your vehicle's
battery negative (-) terminal or to a point in the
vehicle's fuse box that provides a continuous source
of 12 Volts even when the ignition is turned off.
NOTE: Be sure the metal part is not insulated from the
vehicle's frame by a plastic part.
2. Connect the red (to switched accessory) wire to a
source of voltage that turns on and off with the
ignition switch, such as a spare accessory terminal
in your vehicle's fuse box.
3. Connect the orange
GROUND wire to a
metal part of your vehicle's
frame*. This connection
provides last channel
memory feature.
Reconnect the DC power cord to the DC jack.
* A good, direct metal-to-metal ground is essential for optimum
performance. For the best ground connection, remove any paint,
dust or grease from the grounding point.
10
RED ORANGE BLACK
Positive Ground System
(BATT)
(GROUND)
(GROUND)
RED ORANGE BLACK (GROUND)
(BATT)
Negative Ground System