Specifications

Gas burners - INDITHERM
MAXON UNITED STATES - MAXON EUROPE - MAXON ASIA - WWW.MAXONCORP.COM
E 2.160.12
3/05
All data shown on this page are subject to change without notice.
Start-up and adjustment instructions
Instructions provided by the company or individual responsible for the
manufacture and/or installation of a complete system incorporating
Maxon burners take precedence over the installation and operating
instructions provided by Maxon. If any of the instructions provided by
Maxon are in conflict with the local codes or regulations, please contact
Maxon before initial start-up of equipment.
Before initiating the following start-up and adjustment procedure, it is
important that a check be made to verify that all of the equipment asso-
ciated with and necessary to the operation of the INDITHERM burner
system has been installed and piped in accordance with the “General
installation instructions”. If the burner system is part of an oven or
other heating unit which has been purchased as a complete pre-piped
and pre-wired package, it may be assumed that these instructions have
already been carried out by the individual or company responsible for
the overall installation.