Specifications

Gas burners - INDITHERM
MAXON UNITED STATES - MAXON EUROPE - MAXON ASIA - WWW.MAXONCORP.COM
E 2.160.4
3/05
All data shown on this page are subject to change without notice.
Dimensions
(1) When customer's control motor is used, INDITHERM burner is arranged to accept it, but requires a CB&L assembly, see page<$vol-
num>.160.7
(2) For high temperature applications include a discharge sleeve.
(3) Thread: ISO 7/1.
(4) Not certified, but according to motor manufacturer's information.
(5) Add minimum 25 mm to dimension “G” when cutting opening for discharge sleeve.
Size
Dimensions in mm (unless stated otherwise)
AB
(3) CDE (4) FG (5) HJKLMNPRSTU
100 224 1" 138 168 438 91 160 214 224 260 111 365 92 353 289 451 433 5
300 224 1 1/4" 138 195 437 90 210 264 222 259 111 365 113 353 289 449 433 5
600 308 1 1/2" 154 219 459 95 260 318 251 297 138 514 143 400 341 516 502 8
800 387 2" 154 219 459 67 260 318 251 297 138 598 143 448 403 535 752 8
1100 386 2" 154 219 605 132 311 375 360 424 165 597 170 448 403 630 752 8
2000 451 3" 154 219 564 132 311 375 360 424 165 659 170 480 449 676 752 8
200 mm
air filter assembly
1/8” air switch
connection
sight glasses
gas inlet
(1)
control motor
(2)
discharge sleeve
AISI 310S
G.O .D .
4 mounting holes
ø13
UV scanner protection
adjustable
orifice 1/8”
1/4” gas
pressure test
connection
1/4” air
pressure test
connection
spark ignitor
NOTE:
Dimensions of silencers available on request.
Burner can be mounted in any position (subject to limitations set by
manufacturer of control motor and UV-scanner).