Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
32
CAUTION
The sliding axel assembly on a trailer can collide with a Liftgate mounted
on the slide rails. To prevent damage to Liftgate and trailer, install stops on
the slide rails to keep the sliding axels from hitting Liftgate. Refer to Liftgate
clearance dimensions in this section of the manual.
If the Liftgate is mounted on a slide-axel trailer, attach stops on the slide rails to pre-
vent the slide axels from hitting the Liftgate. Refer to the VEHICLE REQUIREMENTS
section in this manual.
STEP 12 - ATTACH SLIDING AXEL STOPS (IF REQUIRED)