Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
31
STEP 11 - PLATFORM ADJUSTMENT
NOTE: Park vehicle on level ground and
unload vehicle before doing this
procedure.
1. Lower platform to ground and unfold
fl ipover (FIG. 31-1A).
PLATFORM LOWERED TO GROUND
FIG. 31-1A
2. Loosen adjustment and limit bolts
on both sides of platform (FIG. 31-
1B).
3. Turn adjustment bolts counterclock-
wise to tilt the tip of platform up (FIG.
31-2), or turn clockwise to tilt down
(FIG. 31-3).
4. Once platform is adjusted, tight-
en limit bolts securely on both
sides of platform (FIG. 31-1B).
TILT ADJUSTMENT
(RH SHOWN)
FIG. 31-1B
ADJUSTMENT
BOLT
LIMIT
BOLT
RAISE TIP OF PLATFORM
FIG. 31-2
LOWER TIP OF PLATFORM
FIG. 31-3
TIP OF
PLATFORM
LEVEL LINE
TIP OF
PLATFORM
LEVEL LINE