Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
30
2. Bolt RH side plate to slider
frame as shown in FIG. 30-1.
Repeat for LH side. Torque each
bolt to 120 lb-ft.
BOLTS
(6 PLACES)
FLAT WASHER
(6 PLACES)
FLAT WASHER
(6 PLACES)
LOCK NUT
(6 PLACES)
FIG. 30-1
SIDE
PLATE
SLIDER
FRAME
STEP 10 - FINAL BOLTING - Continued