Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
29
STEP 10 - FINAL BOLTING
FIG. 29-1A
FIG. 29-1D
TOP
SLOT
SLIDER
FRAME
SIDE PLATE
1. Use side plate as a template
to drill 6 holes (1/2” dia.) in
slider frame (FIG. 29-1A).
Repeat for LH side.
FIG. 29-1B
FIG. 29-1C
MIDDLE
SLOT
BOTTOM
SLOT
NOTE: Six holes must be drilled
through each side of the
slider frame to bolt RH and
LH side plates to slider frame
on the Liftgate. (See FIGS.
29-1A, 29-1B, 29-1C &
29-1D.)
USE TOP
HOLES
USE TOP
HOLES
USE BOTTOM
HOLES
REFER TO FIG. 29-1B,
29-1C & 29-1D