Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
28
PLATFORM
VEHICLE
FLOOR
1. Raise platform above vehicle fl oor
height (FIG. 28-1).
PLATFORM
VEHICLE
FLOOR
PLATFORM FLUSH WITH VEHICLE FLOOR
FIG. 28-3
STEP 9 - LEVELING PLATFORM
PLATFORM ABOVE VEHICLE FLOOR
FIG. 28-1
CAUTION
Operate Liftgate with caution
until installation is complete.
2. Loosen bolts on both side plates
(FIG. 28-2). Lower platform fl ush
with vehicle fl oor (FIG. 28-3). Next,
nudge the Liftgate toward the front
of vehicle (FIG. 28-1). Then tighten
bolts. Torque each bolt to 120 lb-ft.
FIG. 28-2
BOLTS
SLOT
SLOT
NOTE: Refer to Operating
Instructions decal and
applicable WARNING &
CAUTION decals.