Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
23
NOTE: MAXON recommends using dielectric grease on all electrical connections.
3. Run control cable from external control
box, under vehicle body (see dashed
line, FIG. 23-1A), and up through
vehicle fl oor. Pull control cable through
3/4“ hole (FIG. 23-1A).
INTERNAL
CONTROL SWITCH
EXTERNAL
CONTROL
BOX
3/4” HOLE
CONTROL
CABLE
STEP 6 - BOLT ON INTERNAL CONTROL SWITCH
- Continued
4. Connect the control cable to the inter-
nal control switch (FIG. 23-1B).
CONNECTING
CONTROL CABLE
FIG. 23-1B
BLACK
GREEN
WHITE
CONNECTING CONTROL
BOX CABLE
FIG. 23-1A