Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
20
STEP 4 - BOLT ON LIFTGATE - Continued
2. Bolt Liftgate to RH side plate
as shown in FIG. 20-1. Re-
peat step for LH side plate.
Before bolts are tightened,
position Liftgate all the way
toward rear of vehicle body
(FIG. 20-2).
LOCK NUT
(2 PLACES)
FLAT
WASHERS
(2 PLACES)
FLAT
WASHERS
(2 PLACES)
BOLT
(2 PLACES)
BOLTING LIFTGATE TO SIDE PLATES
(RH SIDE SHOWN)
FIG. 20-1
NOTE: Use the bolts, nuts, and fl at washers from STEP 1 for bolting on the Liftgate.
FIG. 20-2
BOLTS