Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
19
STEP 4 - BOLT ON LIFTGATE
BED
HEIGHT
SLOT
46” TOP
47” TOP
48” TOP
49” MIDDLE
50” MIDDLE
51” MIDDLE
52” BOTTOM
53” BOTTOM
BED
HEIGHT
SLOT
46” MIDDLE
47” MIDDLE
48” MIDDLE
49” MIDDLE
50” MIDDLE
51” MIDDLE
52” BOTTOM
53” BOTTOM
3” CROSSMEMBERS
TABLE 19-1
4” CROSSMEMBERS
TABLE 19-2
1. Raise Liftgate to line up the
holes in the slider with the prop-
er mounting slots on the side
plates (FIGS. 19-1A & 19-1B).
LINING UP SLIDER WITH SIDE PLATES
(RH SIDE SHOWN)
FIG. 19-1A
FIG. 19-1B
MIDDLE
SIDE
PLATE
SLIDER
NOTE: Refer to TABLES 19-1 (3”
Crossmembers) & 19-2 (4”
Crossmembers) for correct
mounting distance and slot
information.
BOTTOM
TOP
OPTIONAL JIG