Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
18
STEP 3 - PLACE SLIDER ASSEMBLY ON OPTIONAL JIG
NOTE: MAXON recommends using optional installation jig for lifting and maneu-
vering slider assembly under the vehicle.
Use forklift to place slider assembly on the installation jig.
Ensure the slider assembly is:
• Centered on the jig (FIG. 18-1)
• Correctly supported by the jig (FIG. 18-2)
SLIDER ASSEMBLY CENTERED
ON JIG (FRONT VIEW)
FIG. 18-1
SLIDER ASSEMBLY SUPPORTED
BY JIG (LH SIDE VIEW)
FIG. 18-2
JIG
SLIDER
ASSY
CENTER
JIG
SLIDER
ASSY