Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
17
STEP 2 - WELD SIDE PLATE - Continued
13. Weld RH side plate, support plates, and mount plates as shown in FIG. 17-1. Repeat
step for LH side plate.
SUPPORT PLATES
(3 PLACES)
SIDE
PLATE
MOUNT PLATES
(3 PLACES)
WELDING SIDE PLATE TO CROSSMEMBERS (RH SHOWN)
FIG. 17-1
14. Weld gussets to RH side plate as shown in FIG. 17-2. Repeat step for LH side plate.
WELDING GUSSETS TO SIDE PLATE (RH SHOWN)
FIG. 17-2
GUSSETS
(4 PLACES)
1/4”
1/4”
1/4”
1/4”
1/4”
SIDE
PLATE