Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
12
STEP 2 - WELD SIDE PLATE - Continued
FIG. 12-1
CENTER
LINE
5. Refer to FIG. 12-1. Measure the distance (“D”) between slide rails. Then calculate
dimension “Y” as follows: (52 7/8” - D) x 1/2 = Y
Example where D = 50” :
Y = (52 7/8” - 50”) x 1/2, Y = 2 7/8” / 2, Y = 1 7/16”
SLIDE
RAILS
SIDE
PLATE
SIDE
PLATE
52-7/8”
(MEASURE INSIDE,
CENTER TO BODY)
D
Y
6. Adjust a combination square to the “Y”
dimension (FIG. 12-2) or fabricate a
spacer equal to the thickness of “Y”.
Y
SLIDE
RAILS
FIG. 12-2
COMBINATION
SQUARE