Installation guide

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
11
X
(TABLE 11-1)
STEP 2 - WELD SIDE PLATE - Continued
BED
HEIGHT
DISTANCE
(“X”)
EXPECTED
GROUND
CLEARANCE
(“Y”)
46” 10-3/4” 12-5/8”
47” 10-3/4” 13-5/8”
48” 10-3/4” 14-5/8”
49” 9-9/16” 14-1/8”
50” 9-9/16” 15-1/8”
51” 9-9/16” 16-1/8”
52” 8-1/4” 15-5/8”
53” 8-1/4” 16-5/8”
4”
SIDE VIEW - 4” TRAILER CROSS MEMBERS
FIG. 11-1
TABLE 11-1
FLOOR
CROSSMEMBER
4. For 4” trailer crossmembers, mark position
for side plate on crossmember (FIG. 11-1
and TABLE 11-1).
NOTE: The instruction below only applies to trailers
with 4” crossmembers. If trailer has 3” cross-
members, go to the previous page.
NOTE: To mark a position between 2 crossmem-
bers, attach tape from crossmember-to-
crossmember. Remove slack before marking
the tape.