Datasheet

Motherboard Design Guide
Requirements for Components of Third-party Suppliers
maxon motor control
5-32 Document ID: rel5730 ESCON Servo Controller
Edition: November 2015 ESCON Module 24/2 Hardware Reference
© 2015 maxon motor. Subject to change without prior notice.
CAPACITOR (C1)
The function of the ESCON Module 24/2 does not necessarily require the use of an external capacitor
(C1). To further reduce voltage ripple and feedback currents, an electrolytic capacitor can be connected
to the voltage supply cable.
5.1.3 Encoder Inputs
To protect the encoder inputs of the ESCON Module 24/2 against overcurrent, we recommend using an
external TVS diode network.
Figure 5-24 Encoder Inputs – Protective Circuitry
5.1.4 Analog Inputs and Outputs
To protect the analog inputs and outputs of the ESCON Module 24/2 against overcurrent, we recom-
mend using an external TVS diode network.
Figure 5-25 Analog Inputs and Outputs – Protective Circuitry