User's Manual

FCC Documentation
MM-5500SU CDMA 1X/EVDO Modem
10/10
Confidential and proprietary information.
This document is the sole and exclusive property of Maxon Australia.
Not to be distributed or divulged without prior written agreement.
4. Instruction
• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• Do not drop the unit or give a shock to the unit, or it may cause a malfunction.
4.1 Supplied accessories
- MM-5500SU CDMA 1X/EVDO Modem unit (1)
- CDMA Antenna (1)
- USB cable assembly (1)
- Power adapter assembly (1)
4.2 Getting start
First for mounting the MM-5500SU Wireless Modem, bind to the unit the holding
bridles and connect accessory following procedure.
1. Connect
CDMA antenna
to the SMA connector – labeled “
SMA Ant
” at right bracket
2. Connect USB data cable assembly
to the connector – labeled “USB” at left bracket
3. Connect power adapter assembly
to the power connector – labeled “PWR” at left bracket
Note. Please pull out by grip the plug/connector, not the cable.
SMA Ant
DATA
PWR
USB
RS-232C
Diagnostics Only
Figure 3. Left side bracket
Figure 2. Right side bracket