User's Manual

Setup Maxon MaxCard+ Modem

1.0 Setup Maxon MaxCard+ Modem

Insert the installation CD (supplied with the Maxon MaxCard+ Modem) into the CD-ROM drive. This will

automatically start the installation and install the required drivers plus the Maxon MaxCard+ Modem

Application software. Do not connect the Maxon MaxCard+ Modem to your laptop yet.

The installation procedures are the same for Windows 2000 and Windows XP. The procedures for

installing on Mac OS are different, please read the appropriate guide.

1.1 Start setup

If the auto run does not start after inserting the CD, please double-click “Setup.exe” on your CD ROM drive

to start the installation. If you have already connected your Maxon MaxCard+ Modem into your PC,

disconnect the Modem and double-click “Setup.exe”