User's Manual

FCC Documentation- CM-5100P CDMA 1X Network card
13/25
Maxon Proprietary : Restricted Distribution. This document is the sole and exclusive property of Maxon
Australia. Not to be distributed or divulged without prior written agreement.
Maxon Electronics Australia Pty. Ltd. 36A Gibson Avenue, Padstow, N.S.W. Australia
Tel : [phone] Facsimile : [phone] URL : http//www.maxon.com.au
4.2.7 Connect ear-piece
to the ear-jack connector If you want to use as a phone.
Microphone and earphone signals for Voice Call are provided to interface with headset directly.
1. Connect the ear-piece plug firmly the ear-jack port hole.
2. Ware the Ear-piece to the left or right ear and adjust the ear-piece to fit to your ear firmly.
- Press for more than a second during buzzer ringing for receiving voice call
- Press for more than a second when redial, this time you heard dialing sound
When adjusting the volume on the unit, please refer to the “CM-5100P Software manual” for detail
information.
4.2.8 LED display
Table 4.2.1 LED function descriptions
LED Color
Function
RED GREEN YELLOW
Power Turn ON
Unsuccessfully Initialize
Ο
Successfully initialize & not enough to link
Flashing
Successfully initialize & enough to link
Ο
Voice call
Ο
Data connection & communication Flashing