User's Manual

6
This function is set when holding the Lamp.Lock button 2 seconds or more and padlock icon is
displayed.
Lock function is not disabled although power off and then power on again.
To disable Lock function, press the Lamp/Lock button again 2secs or more.
Battery Indicator
It displays charging level of battery.(1~7)
Upon detection of low battery condition, the radio shall emit three beeps repeatedly
with display message "LOW-BATT". Radio continuously flashes the red led for the duration of 500ms
to indicate a low battery condition, the radio shall transmit the audio.
If low battery, the radio can transmit continuously but out power is only low power and then low battery
alert shall be given and displayed
SquelchLevel
This function enables speaker when the receving signal level is more than selected level and disable
speaker
when it is less than seleted level. You can set this option at PC Program or SQ level item in menu mode.
In menu mode case, display "SQLv + number" and you can select 1~10 as up/dn button.
Group Button
S
P-6102 radio can use maximum 13 groups.
Each group has maximum 16 channels and one priority channel.
The group that you want can be set by PC program.
if a group set, display current group number at left side below on LCD.
In group mode you can edit scan list channel and priority channel with your own hands with the radio.
Press the TX power/group button 2 secs or more, then display "GRP" on left side LCD bottom.
At this time you can move to the group you want by using up/dn button.
When display the group button, you can exit this function with pressing PTT
.