User's Manual

button to select those channel groups you wish to edit. After channel group
selection has been made press and release the scan button, first button located
beneath the PTT button, the channel number within your selected channel
group may now be edited. If channel number is flashing that channel
is already included in the scan list of the selected channel group. If channel
number is solid that channel is not included in the scan list To add or delete
the selected channel to or from the scan list press and release the monitor
button, second button located beneath the PTT button. The selected channel
will flash if selected channel was added to the scan list or the selected channel
will be solid if the selected channel was deleted from the scan list. To edit
other channels press the buttons to select the desired channel within the
channel group to be added or deleted from the channel group scan list and
repeat the process. Upon completion of adding or deleting channels to or from
you r channel group scan list press and release the scan button, first button
located below the PTT button., your new channel group scan list should be
entered at this time.
Priority Channel Edit: Only one priority channel can be programmed into the
radio. To edit a priority channel, turn radio off, press and hold scan button,
first button beneath the PTT button. While holding scan button turn radio on,
release the scan button after the second red flash of the LED and PE is shown
in the display. Upon release of the scan button the first channel number will be
displayed. If displayed channel is not your desired channel to be the priority
channel press and release the buttons to select the desired channel to become
the priority channel. After you have selected the desired channel if the channel
number is flashing that channel is already selected as the priority channel. If
channel number is solid that channel is not selected as the priority channel. To
add or delete the selected channel as the priority channel press and release the
monitor button, second button located beneath the PTT button. The selected
channel will flash if selected channel was added as a priority or the selected
channel will be solid if the selected channel was deleted as the priority. Upon
completion of adding or deleting the priority channel press and release
the scan button, first button located below the PTT button., your new priority
channel should be entered at this time.