User Manual

7
· Priority Only TX: Allows a transmission on the priority channel when scanning and not stopped on an active channel. It can also
be programmed to ( Remove) will always transmit on the priority channel if scanning
or stopped on an active channel.
· Receive Only Scan: This allows only reception. If a transmission is made at any time, the radio will sound an alarm (two beeps) ,,
display r0 and will not allow the transmission.
Scan List Edit
You as a user can edit your radio’s scan list and priority scan channel at anytime form your radios original program.
Your radio may have been programmed for channel only scan operation or channel Group scan operation this operation was
determined by your Dealer programming. Please note, if your radio has been programmed for channel only scan you will not be able
to edit your scan list. You will be able to edit your priority channel.
Channel Only Edit: To edit the scan list in a radio programmed for channel only scan, turn radio off, press and hold scan button, first
button beneath the PTT button. While holding scan button turn radio on, release the scan button after the first red flash of the LED
and SE is shown in the display. Upon release of the scan button the first channel number will be displayed. If channel number is
flashing that channel is already included in the scan list. If channel number is solid that channel is not included in the scan list To add
or delete the selected channel to or from the scan list press and release the monitor button, second button located beneath the PTT
button. The selected channel will flash if selected channel was added to the scan list or the selected channel will be solid if the
selected channel was deleted from the scan list. To edit other channels press the ▲ or ▼ buttons to select the desired channels to be
added or deleted from the scan list and repeat the process. Upon completion of adding or deleting channels to or from you r scan list
press and release the scan button, first button located below the PTT button, your new scan list should be entered at this time.
( Remove entire statement)
Channel Group Edit: To edit the Group scan list in a radio programmed for channel group scan, turn radio off, press and hold scan
button, first button beneath the PTT button. While holding scan button turn radio on, release the scan button after the first red flash of
the LED and SE is shown in the display. Upon release of the scan button the first group number will be displayed. If you do not wish
to edit the group you have selected press the button to select those channel groups you wish to edit. After channel group selection has
been made press and release the scan button, first button located beneath the PTT button, the channel number within your selected
channel group may now be edited. If channel number is flashing that channel is already included in the scan list of the selected
channel group. If channel number is solid that channel is not included in the scan list To add or delete the selected channel to or from
the scan list press and release the monitor button, second button located beneath the PTT button. The selected channel will flash if
selected channel was added to the scan list or the selected channel will be solid if the selected channel was deleted from the scan list.
To edit other channels press the ▲ or ▼ buttons to select the desired channel within the channel group to be added or deleted from the
channel group scan list and repeat the process. Upon completion of adding or deleting channels to or from you r channel group scan
list press and release the scan button, first button located below the PTT button., your new channel group scan list should
be
entered at this time.
Priority Channel Edit: Only one priority channel can be programmed into the radio. To edit a priority channel, turn radio off, press
and hold scan button, first button beneath the PTT button. While holding scan button turn radio on, release the scan button after the
second red flash of the LED and PE is shown in the display. Upon release of the scan button the first channel number will be
displayed. If displayed channel is not your desired channel to be the priority channel press and release the ▲ or ▼ buttons to select
the desired channel to become the priority channel. After you have selected the desired channel if the channel number is flashing that
channel is already selected as the priority channel. If channel number is solid that channel is not selected as the priority channel. To
add or delete the selected channel as the priority channel press and release the monitor button, second button located beneath the PTT
button. The selected channel will flash if selected channel was added as a priority or the selected channel will be solid if the selected
channel was deleted as the priority. Upon completion of adding or deleting the priority channel press and release the scan button,
first button located below the PTT button., your new priority channel should be entered at this time.
Licensing and Service Information
FCC Licensing
The Federal Communications Commission requires that the operator of this radio be properly licensed under the applicable Part
and/or Parts of the FCC Rules and Regulations.
Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a license.
Service
Do not tamper with internal adjustments. Damage to the equipment and/or improper operation may result. There are no user
serviceable items inside the radio.
It is recommended that you return your radio to a qualified Maxon Dealer for any service or repairs.