User's Manual

Your PM-200 series can be programmed for one of six different scan types, determined by your

Dealer. To enable Scan or Priority scan functions , press and release the scan button for scan or

press and hold for priority scan functions. Only those channel groups included in the scan list will be

scanned.

During scan operations your radio will show dashed lines across the display. When a call is

received or transmission is made the Group name will be shown in the display. When programmed

for Priority Look Back your radio will show the selected channel Group name in the display instead

of the dashed lines.

Talk Back Scan

RX: Your radio only receives calls from its scan list. After a scanned call is received the scan wait

time will be active allowing you to pick up the microphone and answer the call. If the call goes

unanswered scanning will resume after scan wait time has expired.

TX: Your radio will transmit only on its received scanned Group. After transmission is

completed the scan delay time will become active allowing for a call to be immediately

returned before scanning resumes.

Talk Back Scan is enabled by entering the scan mode and is indicated by the SCAN icon.

RX only/TX disable

RX: Your radio will only receive calls from the scan list.

TX: No transmissions are allowed. If transmission is attempted, an alert willbe sounded.

RX only/TX disable scan is enabled by entering the scan mode and isindicated by the scan icon.

Priority TX Scan

RX: Your radio will receive calls from its selected scan list. After a scanned call is received the

scan wait time will be active allowing you to pick up the microphone and answer the call. If the

call goes unanswered scanning will resume after scan wait time has expired.

TX: During scan if a transmission is made your radio will transmit on the selected priority

channel Group. If you receive a call from a scanned channel Group you will be able to

transmit on that received channel

Priority TX scan is enabled by entering the priority scan mode and isindicated by the scan and

“ P” icons.