User's Manual

6. Status Indicators and Alert Tones
Status Indicators
LCD Message or COLOR
DESCRIPTION
SM2102 AUDIBLE TONE
Power On
Model and Software version
shall be displayed after LCD
All Display.
Five Beeps
Button Single Beep
Busy Yellow
Correct Call Green
Transmit Red
In Scan Mode Green Led Blinking
Scan Delete “delete” Single Beep
Scan All Delete “ All del” Single Beeps
Transmit Inhibit In
Scanning
“ Inhibit” Two Beeps
Receive Only-No TX “ RX only” Two Beeps
Time-Out-Timer “ tot ” Two Beep
Penalty “ Penalty ” Two Beeps
Penalty End Single Beep
Busy Channel Lock
Out
“ bLock out” Two Beeps
Error Messages
EPROM Error “ Eprom Err ” Two Beeps
Out of Lock Error “ unLock ” Two beeps
Programming Messages
Pc Program Read “Prog- r “ Red blinking
Pc Program Write “Prog-w “ Green Blinking
Volume level VOL XX
Clone Master “Master” Red blinking
Clone Slave “Slave” Green Blinking
Clone end “Turn OFF”