User's Manual

86 87
SETTINGS SETTINGS
DATA CABLE
1.Press
,,,
to select “Data Cable”.
2.Set each parameter and press to save it.
GPRS
1.Press
,,,
to select “GPRS”.
2.Set each parameter and press to save it.
LANGUAGE
The display will change to the selected language.
1.Press
,,
to select “Language”.
2.Use to select a language.
3.Select one of the available languages and press to save it.
4.The display will change to the selected language.
DATA
You are set parameters for data transmission from your laptop or PC.
1.Press
,,
to select “Data”.
- Bit rate : (300 / 1200~ / 115200)
- Reset : You are to reset it.
1. Attach on
2. Accept calls : You are to mark this up to enable it.
mx-v30(0621) 2004.6.21 9:42 AM Page 86