Installation Instructions

1. Take the BBU box and accessory screws out
from the packing box, then mount the BBU box
onto the right side of wall pack main housing
with screws supplied.
I
ns
t
a
l
l
a
t
i
o
n
&
Ope
r
a
t
i
o
n
(
Con
t
i
n
ue
d
)
7. Secure the door to the housing and apply
w
eatherproof silicone sealant around the edge of
fixture and junction box.
Installation of BBU on Wall Pack
2. Connect the BBU box and the wall pack
main housing with connecting plugs as
shown in diagram.
© Copyright 2017. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 3
REV: 02/20/17
Operating Instructions WP-WMP Series
MaxLite LED WallMax Precision Wall Pack
®