Owners Manual

5. Mount fixture:
Gently snap the fixture into the brackets and
close the latch to secure.
6. Twist the connecting cables (G & H) to the
next fixture. Gently snap fixture into the
brackets and close latches to secure.
Make the
bracket tight.
Twist dimming and input
cable tight.
Two Linked Units Surface Mount Installation
Note: Linkable brackets and end brackets can be purchased seperately.
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 4
REV: 6/21/18
7. Finalize the installation by making sure the
bracket is tight.
Make the bracket tight
Note: For installations requiring continous run, install multiple connecting brackets (F) as needed and follow
above instructions.
Operating Instructions VT Series
MaxLite TriMax LED Vapor Tight
®