Owner's Manual

© Copyright 2015. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page : 3
REV: 07/21/2015
Operating Instructions SEC Series
MaxLite
®
LED SECURITY LIGHT
6. Continue screwing NPT fitting into Junction box until fixture back plate is tight to mounting surface.
7. Lock NPT fitting in place with ½” NPT (not supplied.)
8. Reattach fixture front to fixture back plate.
9. Connect driver OUTPUT leads to quick connect originating from LED array. Red output to quick connect with red wires, black
output to quick connect with black wires.
10. Reattach fixture using two Philips head screws.