Installation Sheet
Installation & Operation
1.) Turn off electrical power before removing
the CFL lamp and trim.
Operating Instructions ECO Series
MaxLite ECO Series 6” & 8” Commercial Downlight Retrofit
®
2.) Open junction box, cut existing wires.
3.) Pass the LED driver through the hole in the ceiling.
LED Lamp Replacement Marking - Identifying the replacement LED lamp type/model to be used along with
manufacturer and ordering information.
Models:
RRECO612ZZ@/V2 – 100-277V 50/60 Hz RRECO818ZZ@/V2 – 100-277V 50/60 Hz
RRECO618ZZ@/V2 – 100-277V 50/60 Hz RRECO824ZZ@/V2 – 100-277V 50/60 Hz
RRECO627ZZ@/V2 – 100-277V 50/60 Hz RRECO840ZZ@/V2 – 100-277V 50/60 Hz
RRECO812ZZ@/V2 – 100-277V 50/60 Hz
Model options: ZZ = CCT (Color Temperature) / @ = Trim Color (White or Silver
)
Ceiling
Ballast
Accessories:
LED Retrofit Kits (Sold Separately):
• RCF-6 6in Recessed Frame
• RCF-8 8in Recessed Frame
© Copyright 2019. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
4.) Attach the clips provided with the RRECO fixture
onto the Recessed Frame Kit by pressing the gap
on the clip into the lip of the fixture. The teeth of the
additional clip should be facing the same direction
as the other clips.
Page: 2
REV: 12/11/19