Installation Sheet

Operating Instructions ECO Series
MaxLite ECO Series 6” & 8” Commercial Downlight Retrofit
®
© Copyright 2017. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 3
REV: 5/17/17
Wiring Diagram
Installation & Operation (Continued)
4.) Set the LED driver box beside the frame. Tuck one connection end into existing J-box to connect electrical
power. (See wiring diagram.)
5.) Connect the downlight with driver using the
quick connector.
6.) A. If the fixture is not secured properly by existing
hardware, secure the 3 mounting clips
supplied to the aperature ring.
B. Push the LED downlight upward carefully
and make sure the trim is firmly secured by
the mounting frame.