Installation Sheet

Standard Wiring Diagram
Operating Characteristic
Voltage input: 120-277V 50/60Hz
Operating temp: -4°F to 104°F
**Consult with dimmer control manufacturer’s wiring instructions.
Risk of fire or electric shock, installation requires knowledge of the lighting luminaires electrical
systems. If not qualified, do not attempt installation and contact a qualified electrician.
Operating Instructions MLFPxxG4 Series
MaxLite FlatMAX LED Flat Panels
®
T
M
Black
White
Green
L
N
GND
AC120V-277V
L
N
GND
LED+
LED-
DIM+
DIM-
12V AUX
LED’s
White
(Driver +)
Black (Driver -)
Purple
Gray/Pink
LED Dimmer
GND
DIM
DC 0-10V -
DC 0-10V +
Installation Instructions
1.) Using a screwdriver open the cover of junction box.
2.) a.) Non-dimmable products: connect hot line (in black color )L with L line in driver, and netural line(white color)
with N line in driver.
b.) Dimmable products: connect dimming line in purple color with line marked Dim+ in the driver and DIM- in
grey with DIM- in the driver.
3.) Remove knock-out(s) and connect conduit to the junction box using the proper connector(s).
4.) Close the junction box cover and fasten using a screwdriver.
LED+
Yellow (Driver +)
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 6
REV: 11/03/21