Installation Sheet

Flange Installation
Flange sold separately:
• ML14G4FK • ML22G4FK • ML24G4FK
Operating Instructions MLFPxxG4 Series
MaxLite FlatMAX LED Flat Panels
®
T
M
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 5
REV: 11/03/21
Dimensions
The Recess Troffer Flange Mounting Kit is designed for recess installation in drywall ceiling applications.
Installation Instructions
1. For installation in plaster ceilings, cut an opening of the appropriate size, and then connect the panel
light to an incoming power line.
2. Rotate the panel light by 45 degrees.
3. Pass the panel through the ceiling surface.
4. Lay in the panel light on the ceiling or grid.
Item #
ML14G4FK
ML22G4FK
ML24G4FK
A (Width) B (Width) C (Width) D (Length) E (Length) F (Length)
A+1/4”
(Width)
D+1/4”
(Length)
12.84” 13.5” 11.35” 48.66” 49.36” 47.2” 13.09” 48.91”
24.65” 25.31” 23.16” 24.65” 25.3” 23.1” 24.90” 24.90”
24.65” 25.31” 23.16” 48.66” 49.36” 47.2” 24.90” 48.91”
Flange Kit Size
After Assembly (inches)
Ceiling Cut Out Size
(inches)
Wire Support
Wire attachment points
12 GA mild steel wires (not supplied)