Installation Sheet

Setting Color Temperature
Note: Applicable to models ending in CS only. Models are set to lowest wattage and 4000K.
3500K
4000K
5000K
Color settings:
Left, stands for 3500K;
Middle, stands for 4000K;
Right, stands for 5000K;
Operating Instructions MLFPxxG4 Series
MaxLite FlatMAX LED Flat Panels
®
T
M
Setting Wattage
Note: Applicable to models ending in WCS. Models are set to lowest wattage and 4000K.
L
M
H
3500K
4000K
5000K
Color settings:
Left, stands for 3500K;
Middle, stands for 4000K;
Right, stands for 5000K;
Wattage settings:
Left, stands for Low;
Middle, stands for Medium;
Right, stands for High;
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 2
REV: 11/03/21
Wattage Switch
CCT Switch
Adjust the color temperature and lumen output using
the two DIP switches. Each DIP switch has 3 options
(left, middle and right), corresponding to 3 color
temperatures and wattages. Use these switches to
set desired color temperature and lumen output
combination.
Factory Settings: 4000K, lowest wattage based on
fixture.
1. DIP switches are located on the back side of the
fixture.
2. Select a wattage and color temperature by sliding
switch left or right respectively to the desired value.