Owner's Manual

© Copyright 2016. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page : 5
REV: 01/13/16
Operating Instructions LSU Series
MaxLite
®
LED UTILITY WRAP FIXTURES
Setting and adjusting the Motion Sensor
To make setting and control adjustments, you will need to access the three rotary DIP controls behind the lens.
Please note, your control is equipped with a quality neoprene seal. This seal does expand over time providing
maximum sealing protection possible. If you have any trouble re-installing the lens, a light coating of WD-40 as
lubricant, to the seal, will make installing the lens easier. Care should be taken NOT to spray lubricant into the
DIP switches.
Battery Back Up Option
Your MaxLite Utility wrap fixture may come equipped with a battery back up power system.
Please review all following remarks to prevent any damage or risk while installing or using your fixture:
This Option is covered under UL 1598 and is a factory assembled system. Any field installation will void the
factory warranty unless express written authorization is given in advance.
Contains Nickel-Cadmium Rechargeable Battery. Must be recycled or disposed properly.
Output%LVLE%Compliant%
Default!
parking!
profile
Default!
Stair
profile