Specification Sheet

PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: [phone] | Fax: [phone] | Web: www.maxlite.com | E-mail: [e-mail]
MAX16073
Revised: 10-17-17
Page: 1 of 2
PRODUCT DESCRIPTION:
A cost effective LED Utility Wrap Fixture, features full length
U Wrap Acrylic lens, one piece fabricated steel body.
Designed to meet or exceed 7-10Fc at 8’ installed heights
for parking drive lane compliance. For uses as utility
lighting, parking garage and stairwell lighting where meets
applicable building and safety codes.
FEATURES:
• Steel Construction
• Back and End Knockouts
• Class II driver, with 0-10V dimming
• Low power consumption
• Ceiling or wall mounted
• For covered use only – damp rated *
• Wire Guard available
• White Finish standard
• CRI > 83
• Optional Occupancy Sensor available
• Assembled in USA available upon request
CONSTRUCTION:
• 20 Ga. Steel body and end caps
• Clear Acrylic Prismatic Lens
• Electrostatic Paint pre-assembly
• Universal voltage 120-277V
• 2ft Product Dimensions: 25” x 6.75” x 2.5” (L x W x H)
• 4ft Product Dimensions: 53.25” x 6.75” x 2.5” (L x W x H)
NOTES:
1. MSO models are to be used in dry locatioins only
2. For DLC compliance to Stairwell & Passageway use MS models
3. For DLC compliance to Linear Ambient Direct use standard models
4. For DLC Lowbay performance use 4’ 50w model
5. 347V is not DLC qualified
6. In the event of a power failure, the battery backup unit switches to emergency
mode (700 lumen output) and operates the fixture for a minimum of 90 minutes
7. 50W products are DLC Standard
8. 2ft 20W 4000K products is DLC Standard, 2ft 20W 5000K product is not DLC
qualified unless used with motion sensor
LED UTILITY WRAP
LSU GEN3 SERIES
LS U 4
FAMILY TYPE
LENGTH
(IN)
VOLTAGE
NOMINAL
WAT TAGE
CCT OPTIONS
LS=
Linear Series
U=
Utility Wrap
2=
4=
2 ft
4 ft
U=
3=
120-277
347v SDT
20=
30=
50=
20W*
30W
50W
40=
50=
4000K
5000K*
(OMIT)=
EM=
MS=
MSO=
None
Battery Backup Unit
Bi-Level Motion Sensor
On/Off Motion Sensor
MODEL SELECTION (Full list of order codes on pg. 3) Typical order example: LSU4U3040
Damp Listed
L
A
M
P
D
I
M
M
A
B
L
E
L
A
M
P
D
I
M
M
A
B
L
E
4’ Utility Wrap
S
E
N
S
O
R
M
O
T
I
O
N
LINE DRAWING:
Side View
Top View
Front View
2.5”
6.75”
2.5”
6.75”
48.75”
53.25”
48.75”
53.25”
“MS” version shown for reference