Owner's Manual

Operating Instructions LSP Series
MaxLite Polygon Linear LED Light
®
© Copyright 2016. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 2
REV: 6/07/16
Installation
A. Surface Mounting Type
0-10V Dimmable Wiring Diagram
CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
0-10V Dimmable Wiring:
1.) Connect the black fixture wire to the HOT LINE supply wire.
2.) Connect the white fixture wire to the NEUTRAL supply wire.
3.) Connect the green fixture wire to supply ground wire.
4.) Connect the purple fixture wire to the (V+) DIM wire.
5.) Connect the gray fixture wire to the (V-) DIM wire.
6.) Cap yellow 12v lead.