Installation Instructions

Connector Box Assembly Instructions
1.) Fix the metal sheath to the connector box.
2.) Fix the connector box to a wall by 4 screws.
3.) Connect the AC wires correspondingly with wire caps.
4.) Fix the connector box cover to the connector box with 4 screws.
Function Description
NOTE:
”AC out” junction should be connected to the distribution box by a wire joiner.
Operating Instructions LiteBar Series
MaxLite LED Self-Driven LiteBars
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 3
REV: 1/23/18
Wire Joiner
AC out junction
Ground
AC ---L
AC ---N