Installation Instructions

Mounting Bracket Options
1.) Fix the rotation bracket with 2 screws, then insert the LiteBar into the clip. The bracket can rotate between
-35 to +35 degrees.
2.) Attach the bracket to a magnetic surface so that no screws are necessary. Insert the LiteBar into the clip.
3.) Insert the LiteBar into the clip. Fix the bracket to the mounting surface with 2 screws.
Operating Instructions LiteBar Series
MaxLite LED Self-Driven LiteBars
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 7
REV: 1/23/18
Rotation bracket
Magnet bracket
Mounting clip