Specification Sheet

PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: [phone] | Fax: [phone] | Web: www.maxlite.com | E-mail: [e-mail]
MAX17155
Revised: 09/27/18
Page: 1 of 8
PRODUCT DESCRIPTION:
MaxLite DirectFit LED T8 lamp is the ideal plug and play solution
that works straight out of the box. Designed to deliver between
1800- 1900 lumens, these energy-saving LED lamps are quick,
easy and safe to install into existing linear uorescent xtures
without any extra effort or re-wiring. MaxLite DirectFit LED T8
lamps utilize the existing T8 instant-start electronic ballasts,
thus minimizing maintenance and labor costs. Tested to NSF
Standards, these lamps carry the ETL Sanitation Mark and are
suitable for use in an environment where food intended for human
consumption is produced.
FEATURES:
• Wattage: 13W
• Lumens: 1800-1900
• Input Voltage:120-347 VAC, determined by uorescent
ballast
• Compatible with most electronic instant-start and
programmed rapid start T8 ballasts, emergency ballast, and
dimming ballasts
• 330° beam angle
• Color Rendering Index (CRI): ≥80
• 50,000 hour life (L70 standards)
• THD: <20%
• UV Free
• Power Factor: 0.90 nominal
• Dimmable (ballast dependent)
• Five year limited warranty
• Suitable for use in dry locations
• Suitable for damp locations
• Suitable for use in totally enclosed recessed xture
• Not for use with T12 magnetic or electronic ballasts
• Not for use with T8 magnetic or HO ballasts
• Not for use or to be wired to “mains voltage”
COMPLIANT
RoHS
COMPLIANT
RoHS
LED T8 - LINEAR REPLACEMENT LAMP
DIRECTFIT COATED GLASS SERIES 5
UL TYPE-A
L13 T8 DF 4
FAMILY LAMP TYPE OPERATION LENGTH CCT
L13= LED Linear, 13W T8= T8 tube DF= Direct Fit
4=
4 FT
35-CG5=
40-CG5=
50-CG5=
3500K, Coated Glass
4000K, Coated Glass
5000K, Coated Glass
4FT MODEL SELECTION (Full list of order codes on pg. 3)
Typical order example: L13T8DF450-CG5