Instruction Manual

WIRING
CONTROL MODES
1. APP connection control
2.Photocell ON/OFF can be set in the APP
3.QR code can be shared for Admin access.
4.Sensor can be designated to one or more cetain group
INSTALLATION
1:Drill a hole length:15.1mm,width 7.5mm throuth the sheet metal in the bottom of the fixture.
2:Connect wires as shown in below WIRING diagram.
3:Restore power from the circuit breaker.
WARNING:
TURN THE POWER OFF AT THE CIRCUIT BREAKER BEFORE INSTALLING THE SENSOR.