Instruction Manual

Instruction manual

Model：NN-RTPSW

Features

0-10V Bi-level dimming control

USB-C installation

Network node

Daylight harvesting

Specifications

Input voltage: 12 VDC

Input current: 35mA

Power Consumption: <0.5W

Dimming: 0-10V

Op. temperature: 14°F~113°F (-10°C~45°C)

IP rate: IP20

Color: White

Certification: UL

Warranty: Five year

Communication distance: 100ft

Line Drawings

Unit:inch/mm

PAGE 1
Instruction manual Model：NN-RTPSW Features 0-10V Bi-level dimming control USB-C installation Network node Daylight harvesting Specifications Input voltage: 12 VDC Input current: 35mA Power Consumption: <0.5W Dimming: 0-10V Op.
PAGE 2
WIRING CONTROL MODES 1. APP connection control 2.Photocell ON/OFF can be set in the APP 3.QR code can be shared for Admin access. 4.Sensor can be designated to one or more cetain group INSTALLATION 1:Drill a hole length:15.1mm,width 7.5mm throuth the sheet metal in the bottom of the fixture. 2:Connect wires as shown in below WIRING diagram. 3:Restore power from the circuit breaker. WARNING: TURN THE POWER OFF AT THE CIRCUIT BREAKER BEFORE INSTALLING THE SENSOR.
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.