User's Manual

Table Of Contents

Remark

Disarm

Send this

operation code

from your cell

phone

SMS reply you

will receive

1234#0

Arm

1234#1

1234#2

1234#91

1234#90

Electrical

Facility

Wired Accessories:

It supports 2 groups of wired accessories.

Please choose the wired sensor types after connected.

Connect Wired Sensor to Wired Zone 1

Connect N.C. Type Door Sensor to Wired Zone. One cable for the IN1

or IN2 block, another for GND block.

Send text 74 to choose wired sensor type to be N.C.

Test if the alarm occurs when wired sensor is trigger.

Connect Wired Siren

Connect the Negative Pole to GND block,

the Positive Pole to N.O block.

Then link COM block and +12V block.

Linkage AC Electronic Facilities:

It is able to turn on electronic facilities like

lights, or fences to deter the intruder

immediately in the event of alarm.

Ground

Power Output for

Wired Accessories

Normal Close

Normal Open

Common Port

Ground

Wired Interface 2

Wired Interface 1

Note!Wired accessories need DC 12V power support.

They can't be used when only with built-in battery.