User's Manual

The sensor transmits signal to control panel when the
The tamper protection ensures that sabotage attempts
to move the sensor will result in an alarm activation.
2
3
4
5
7
6
2.LED Indicator
3.Magnet
Installation:
1
Door or window is opened, and the transmitter
sends signal to the control panel.
55
<1cm
It will cause on immediate alarm if the magnet
depart from the transmitter more than 2cm in
arming state.
1. Open the back cover of the sensor, pull out the battery tab and
check the battery is fitted properly.
2. Ensure the area that the sensor will be located is clean and free
from dust and moisture. Avoid mounting the sensor in areas with
lots of metal or electrical wiring.
3. Use the adhesive strip to carefully mount the sensor on to the
door/window frame.
4. Mount the magnet on to the door/ window, no more than 1cm
from the sensor.
Please follow manual of alarm system for zone setup. Zone Jumper:
The door sensor is set in normal zone1 as default.
Dimensions (L x W x H): 48 x 71 x 18mm
Temperature:
Humidity:
The new-bought door sensors should be enrolled to the control
panel before use.
Press enroll button of control panel, trigger the sensor by moving the
magnet away from the sensor. The enrolled sensors will automatically
appear in the Accessories Menu in the app. You can customize the
accessory name, select the zone type and also delete the accessory
from the app, if required. For specified operation, please refer to the
manual of alarm system.
Wireless RF Frequency: FHSS 433MHz
70mA
Transmit Current: