User Guide

Programming the MP2

Ramping

2 Scroll to Ramping, press

ENT

3 Ramping Process #, scroll to Set Point #, press

ENT

4 Rmp Rate Proc #, set Ramp Rate (Off, 60 to 900 Deg/Hr),press

ENT

5 **Stored** will ash 4 times to conrm entry.

6 Repeat steps 2 through 7 for Set Points #(2 - 8).

Timers (TM02 required)

2 Scroll to Timers, press

ENT

3 Timer Process #, scroll to Set Point #, press

ENT

4 Timer Process #, scroll to Timer 1 or Timer 2, press

ENT

5 Timer 1: T1 Proc #, scroll to View Hours, Clear Hours

or Set Alarm Hours, press

ENT

View hours

a XXX Hours

Clear hours

b Are You Sure? scroll for Y or N, press

ENT

c If Y, Timer1 Hrs Clear ashes to conrm entry.

Set alarm hours

d T1 Proc # Alarm, scroll to set hrs, press

ENT

e Set Timer1 Alarm ashes to conrm entry.

6 Timer 1: T2 Proc #, scroll to View Hours or

Clear Hours, press

ENT

View hours

a XXX Hours

Clear hours

b Are You Sure? scroll

for Y or N, press

ENT

c If Y, Timer2 Hrs Clear ashes to conrm entry.

7 Repeat steps 2 through 6 for Set Points #(2 - 8).